← Blog
An ivory ceramic balance with two equal forest-green weights on a lavender surface.
Published on
2026-11-12

SGLang vs vLLM: choose an inference engine

SGLang and vLLM are open-source inference engines for serving language models. Both deserve consideration when you need to operate your own model endpoint. The better choice depends on whether your exact model, GPU, request format, and traffic pattern work well together. A headline tokens-per-second result cannot answer that for you.

Start with vLLM if your team already operates it successfully and your required model features are supported. Include SGLang in the evaluation when its documented model support or serving options address a specific constraint, especially workloads with reusable prompts or multi-turn sessions. Prefix reuse is available in both engines, so it is a reason to test carefully, rather than an automatic reason to switch.

This guide compares documented capabilities and proposes a repeatable evaluation. It does not report a Hivenet GPU benchmark or claim that either engine is universally faster.

SGLang vs vLLM at a glance

DecisionSGLangvLLMWhat to verify
Application connectionOpenAI-compatible completion APIsOpenAI-compatible online servingYour actual requests, streaming events, errors, and tool responses
Repeated prompt prefixesRadix-based caching; session-aware optionsAutomatic prefix cachingCold and warm runs with realistic prefix reuse
Structured outputDocumented constrained-output supportDocumented structured-output supportYour schema, model, decoding backend, and validation rules
Model and hardware fitCheck the supported configurationCheck the supported configurationModel revision, GPU, precision, quantization, and required features together
Production choiceCandidate for a measured trialCandidate for a measured trialUseful responses within your latency target, plus operating effort

These are evaluation categories, not performance rankings. Read the current SGLang completion API documentation and vLLM online serving documentation before treating either server as a replacement for an existing endpoint.

Check model compatibility before comparing speed

Write down the exact checkpoint and revision, tokenizer, chat template, context requirements, and output type. A text-only chat endpoint and a vision model with tool calls need different acceptance tests. An engine supporting a model family does not establish support for every quantized checkpoint or feature combination.

Use the SGLang model catalog and vLLM supported-model documentation to narrow the candidates. Then confirm the hardware backend and release you intend to deploy. Record a release or container digest; a moving latest tag makes later results harder to reproduce.

Build a small application acceptance set before a load test. Include a normal conversation, a long input, an interrupted stream, an invalid request, and each tool or image input your application actually uses. Compare meaning and required behavior, rather than expecting every generated token to match across implementations.

Prefix caching needs a realistic workload

SGLang documents radix-based prefix reuse and session-aware cache handling. vLLM documents automatic prefix caching. These capabilities can reuse work associated with matching prompt prefixes. They do not make all subsequent generation free. See the SGLang cache documentation and vLLM prefix-caching guide.

A repeated system instruction followed by different questions is a useful test case. So is a long conversation whose earlier turns remain in the prompt. Add requests with unrelated prefixes, too. A benchmark that repeatedly submits the same document may exaggerate the benefit for an application that rarely sees that pattern.

Separate cold-cache measurements from warmed-cache measurements and record how you established each state. Keep the request order and prefix distribution consistent between engines. If you compare radix caching with paged memory management, avoid treating the names as mutually exclusive feature sets: cache reuse and memory organization answer different questions.

Structured output and tool calls require separate checks

Both projects document constrained structured output, including JSON-schema use cases. Check the selected backend and the constraints you need in SGLang structured outputs and vLLM structured outputs. A generic statement that one engine supports JSON and the other does not is misleading.

Schema-valid output can still contain an incorrect amount, invented identifier, or unsuitable recommendation. Validate the content against application rules. Tool calling adds another requirement: the model output must be parsed into the tool-call representation your client expects. Test tool names, arguments, missing fields, and streamed responses with the actual configuration.

For an invoice extraction service, count a response as useful only when it passes the schema and the required field checks. For a customer-support assistant, use representative questions and a defined quality review. Neither a successful HTTP status nor a high token rate is enough.

Run a comparison that answers your buying decision

First establish a working baseline on each engine. Use the same GPU configuration, model revision, precision, context limit, output cap, and sampling settings where equivalent. Keep the load generator and network path consistent. Document unavoidable differences instead of hiding them inside a single score.

Then run a separately labeled tuning round with the same time budget for both engines. A comparison of one tuned system against another system's defaults tells you little about their practical limits. Keep the baseline results so you can see what each change achieved.

  1. Define success first. Set the acceptable answer quality, time to first token, completion time, and failure rate for the application.
  2. Use representative requests. Preserve realistic input lengths, output lengths, reusable prefixes, and the mix of short and long jobs. Remove private customer data from fixtures.
  3. Increase load in steps. Distinguish concurrent in-flight requests from incoming requests per second. Record the arrival pattern and test duration.
  4. Repeat each condition. Keep cold and warm results separate. Look for run-to-run variation before deciding a small difference matters.
  5. Test the operating path. Check startup, client cancellation, timeout behavior, monitoring, and rollback in a controlled environment.

The projects provide SGLang serving benchmark guidance and vLLM benchmarking tools. Use consistent metric definitions and streaming settings when comparing their output. For background on reading the results, see our guide to LLM inference metrics, TTFT, and token throughput.

Evaluation worksheet

Record for each runSGLang resultvLLM result
Engine version, image digest, launch settingsRecord configurationRecord configuration
GPU count/type, memory, driver; model revision and precisionRecord configurationRecord configuration
Request set, load, duration, cache stateRecord test conditionRecord test condition
Median and p95 time to first token; p95 completion timeMeasureMeasure
Inter-token latency and output token throughputMeasure with definitionsMeasure with definitions
Failures, quality pass rate, peak GPU memoryMeasureMeasure
Accepted responses meeting all latency targets per secondCalculateCalculate
Total run cost / accepted responses meeting those targetsCalculateCalculate

The worksheet deliberately contains no benchmark numbers. Its useful-response measure combines your quality checks and latency requirements. Include failed and timed-out requests in the reported workload, rather than dropping them from the comparison. If no responses qualify, report that the run failed the requirement; a cost per qualifying response is then undefined.

Choose the engine that meets the required service level at an acceptable cost and operating burden. If both meet it and the difference is small, retaining the engine your team can maintain confidently may be the better decision.

Where Compute with Hivenet and Router fit

Compute with Hivenet provides rental infrastructure for workloads you operate. For an engine evaluation, check the currently available GPU configuration and its memory against your model requirements. Renting a GPU does not by itself configure a secure serving endpoint, monitoring, or a rollback process.

Hivenet Router is a separate, self-hosted routing layer, currently labeled alpha. It can sit in front of compatible inference backends, including SGLang and vLLM. It does not run the model weights in place of those engines. Evaluate a direct endpoint first, then test your intended routing and retry policy so added behavior is visible.

If your priority is an operated model endpoint rather than control over the serving engine, compare that requirement with Hivenet Inference Service. Its managed service is a different decision from renting infrastructure to operate SGLang or vLLM yourself. Confirm supported models and service terms instead of assuming you can choose its internal engine.

Before provisioning a comparison, prepare a one-page requirement: model revision, memory needs, representative request lengths, traffic target, latency limits, and operating responsibilities. Use that to assess the current Compute configuration. It gives you a concrete basis for sizing the trial and discussing capacity with Hivenet.

Frequently asked questions

Is SGLang faster than vLLM?

There is no reliable universal answer. Measure the versions and configurations you could actually deploy, using your model and traffic. Prefer useful responses within your latency limits over a peak throughput result from an unrelated workload.

Can I switch by changing the base URL?

That may be part of the change, but it is not an acceptance test. Verify model names, chat templates, sampling parameters, streaming, tool calls, errors, and authentication before sending production traffic to the replacement.

Do I need a router for a single engine?

A router is not necessary just to compare two direct endpoints. Add a routing layer when you have a concrete need, such as a shared entry point for multiple backends, and test its effect on your application separately.

Your next workload belongs on Hivenet.

Pick one AI, compute, or storage workload and see the difference for yourself. Spin it up in minutes, or let our team map your fastest path to production.